Introduction Fan balancing is one of the most sought-after procedures in equipment maintenance. This is due to the high sensitivity of fans to imbalance; even the slightest deviation can lead to significant vibrations. Imbalance occurs when there is a misalignment between the geometric center of the shaft and the center Read more…
Балансирање ротора малчера: зашто и како? Малчер је моћна опрема која се користи за уситњавање вегетације, жбуња и дрвећа. Ротор мулчера, који се окреће великом брзином, подлеже значајним оптерећењима. Неравнотежа ротора може довести до јаких вибрација, буке и превременог хабања опреме. У овом чланку ћемо разговарати Read more…
This article takes you through our recent visit to a home textile factory where down pillows and blankets are manufactured. Our focus will be on the balancing process of the machinery involved in the production. Pre-Balancing Procedures: Vibrometer Mode Measurements Initial Step Before proceeding with the balancing, it is advisable Read more…
1. Увод Ротори пољопривредних машина (бубњеви комбајна, секачи за сламу, ротационе косилице и др.) ротирају великом брзином и носе значајну масу. Чак и мала неравнотежа у таквим роторима може изазвати јаке вибрације, утичући на рад целе машине. Балансирање ротора је кључни део сервисирања комбајна Read more…
Dynamic balancing devices for shafts and machine equipment Balanset-1A priced at €1751. The rotor is a body which rotates about some axis and is held by its bearing surfaces in the supports. The bearing surfaces of the rotor transmit loads to the supports via rolling or sliding bearings. The bearing Read more…
Elevated Vibration Levels in Nestle Pet Food Plant In June of last year, a contractor responsible for maintenance at a Nestle plant specializing in pet food production encountered an issue with one of the crushers. Post-maintenance, the machine displayed increased vibration levels, reaching up to 8-9 mm/s, well above the Read more…
During the balancing of the Fecon forestry mulcher with the FAE attachment, our specialist recorded short videos of the rotor balancing process. In this video, a portable balancing device, the ArBalance vibration analyzer, is used. The balancing process is similar to the process with the Balanset-1A device. The technical characteristics Read more…
Earlier in the article, I described the modernization of an old balancing machine with soft-bearing supports. For such machines, we install the Balanset-1A balancing device in the case of machines with two supports, and the Balanset-4 in the case of machines with more supports. In this article, we will consider Read more…
The image shows a simple balancing stand being used to balance gears. The main feature of softbearing support balancing stands is that they have relatively compliant supports based on spring suspensions, spring-mounted carriages, flat or cylindrical spring supports, and so on. The natural frequency of oscillation of these supports Read more…
Over the course of more than 5 years, approximately thousand devices of the Balanset series have been produced. During this time, three versions of the device have been released, and a lot of work has been done to improve both the device itself and its software. We strive for continuous Read more…
SR 
EN 
BG 
ZH 
HR 
CS 
DA 
NL 
ET 
FI 
FR 
DE 
EL 
HI 
HU 
ID 
IT 
JA 
KO 
LV 
LT 
NB 
PL 
PT_BR 
PT 
RO 
RU 
SK 
SL 
ES 
SV 
TH 
TR 
UK 
VI