Kalit o'lchami qanday tanlanadi?

By shaft diameter per the DIN 6885 standard lookup table (the equivalent ISO/R 773 recommendation is withdrawn).

Qanday kuchlanishlar tekshiriladi?

Shear stress tau=F/(w*L) and bearing stress sigma=F/((h/2)*L).

Qanday kalit uzunligidan foydalanish kerak?

Val diametrining 1 dan 1,5 baravarigacha. Minimal uzunlik — uyaning uzunligi minus qirralar.

Stress kontsentratsiyasi haqida nima deyish mumkin?

Kalit o'yig'i Kt=1,5–2,5 beradi. Yaxshiroq charchoqqa chidamlilik uchun freza bilan ishlangan kalit o'yiqlaridan foydalaning.

Ikkita kalit ishlatish mumkinmi?

Ha, 180 daraja burchak ostida. Toleranslar tufayli har biri 75% yukni ko'taradi deb hisoblang.

Bepul Muhandislik Vositasi #074

Keyway Calculator — DIN 6885

Key sizes per DIN 6885 (formerly ISO/R 773, withdrawn). Enter shaft diameter and torque to find the standard key size and run simplified shear and bearing stress checks.

DIN 6885Stress CheckAuto-Calc

Results

Standart Kalit (w × h)

—

Tangensal kuch

—

Shear Stress

—

Bearing Stress

—

SF (Shear)

—

SF (Bearing)

—

Tangensal kuch

Kalitdagi Kesish Kuchlanishi

Bearing Stress

Standard Key Sizes (DIN 6885)

Key cross-sections below follow DIN 6885. The corresponding ISO recommendation, ISO/R 773, has been withdrawn and is mentioned here for historical reference only; it listed the same sizes but is no longer a current ISO document.

Shaft d (mm)	Kalit w×h (mm)
6–8	2×2
8–10	3×3
10–12	4×4
12–17	5×5
17–22	6×6
22–30	8×7
30–38	10×8
38–44	12×8
44–50	14×9
50–58	16×10
58–65	18×11
65–75	20×12
75–85	22×14
85–95	25×14

Kalit uzunligi = 1–1,5× val diametri. Kalit o'yig'i burchaklaridagi stress kontsentratsiyasini tekshiring (K_t=1.5–2.5). The shear and bearing formulas above are simplified engineering checks assuming uniform stress distribution — they are common design practice, not requirements of any current ISO standard.