Forest Mulcher Rotor Balancing: Key to Efficient Operation
Forest mulchers are powerful machines designed to shred vegetation and create firebreaks. At the heart of the mulcher is a rotor equipped with special knives or teeth, rotating at high speeds to grind trees and shrubs. However, due to intense use and external factors, the rotor can become unbalanced, leading to vibrations.
What is Imbalance?
Imbalance is a condition where the rotor's mass is unevenly distributed relative to its axis of rotation. This results in centrifugal forces that cause unwanted vibrations. Vibration, in turn, can lead to accelerated bearing wear, damage to other mulcher components, reduced efficiency, and even breakdowns.
There are two main types of imbalance: static and dynamic.
חוסר איזון סטטי
Static imbalance occurs when the rotor's center of gravity is offset from its axis of rotation. This causes the rotor to seek a position where its heavier part is at the bottom. Static imbalance can be detected even when the rotor is not rotating.
דוגמה לרוטור עם חוסר איזון סטטי מוצגת באיור 2.
חוסר איזון דינמי
Dynamic imbalance arises from uneven mass distribution along the length of the rotor. In this case, forces and moments are generated during rotation, causing additional vibrations. Dynamic imbalance manifests only when the rotor is rotating.
חוסר איזון דינמי של הרוטור - זוג כוחות צנטריפוגליים
Why Can't You Correct Dynamic Imbalance Without Equipment?
Many mechanics and operators try to correct imbalance "by eye" by adding or removing weights on the rotor without using specialized equipment. However, this approach is only effective for static imbalance. With dynamic imbalance, where heavy points are in different planes of the rotor, it is nearly impossible to visually determine their location and the necessary mass correction.
To eliminate dynamic imbalance, specialized equipment is needed – portable balancers that can accurately measure vibration amplitude and phase, and calculate the necessary corrective weights and their installation locations.
Disadvantages of Increased Vibration
Increased rotor vibration can lead to several negative consequences:
- Accelerated wear of bearings, shaft, housing, and other components
- Damage to the hydraulic system and tractor engine
- Reduced productivity and increased fuel consumption
- Poor working conditions for the operator, increased fatigue, and risk of occupational diseases
- Increased risk of accidents
Field Balancing: Saving Time and Money
Field balancing of the mulcher rotor using a portable balancer is an effective solution that avoids the costly process of disassembly, transportation, and reassembly of equipment. You can quickly eliminate imbalance and resume work, minimizing downtime and saving time and money.
תהליך איזון שלב אחר שלב עם Balanset-1A
- הֲכָנָה: Attach vibration sensors to the mulcher housing near the rotor bearings. The sensors should be oriented perpendicular to the rotor's axis of rotation. Attach a reflective marker to the rotor or pulley. Mount the tachometer on a magnetic stand so that its laser beam hits the reflective marker. Connect the sensors to the "Balanset-1A" device, which in turn is connected to a laptop. Launch the specialized balancing software.
- מדידה ראשונית: Select the two-plane balancing mode in the software. Weigh the calibration weight and enter its weight and installation radius into the program. Start the mulcher rotor and measure the initial vibration level.
- Balancing in the First Plane: Install the calibration weight on the rotor in the first correction plane (usually closer to one of the bearings). Restart the rotor and measure the vibration. Ensure that the vibration or phase changes are at least 20%.
- Balancing in the Second Plane: Move the calibration weight to the second correction plane (usually closer to the other bearing) and conduct a third vibration measurement during rotation.
- ניתוח נתונים: באמצעות הנתונים שהתקבלו, קבע את המשקולות התיקון ואת מיקומי ההתקנה שלהן לאיזון הרוטור.
- התקנת משקולות התיקון: Install the corrective weights on the rotor at the locations specified by the program.
- אימות: Measure the vibration levels after installing the weights and ensure that the vibration is reduced to an acceptable level. If necessary, add or remove part of the corrective weight and recheck the balance.
Balanset-1A: Your Reliable Partner in Rotor Balancing
The "Balanset-1A" is a portable balancer and vibration analyzer, perfect for balancing rotors of various types and sizes, including forest mulcher rotors.
Main Advantages of Balanset-1A:
- קלות שימוש: Balanset-1A is easy to learn and use, even for those without specialized knowledge in vibration.
- הִטַלטְלוּת: Compact and lightweight, the device is easy to transport and use on-site.
- דיוק גבוה: Balanset-1A מספק דיוק מדידה גבוה, ומבטיח איזון איכותי.
- רב-פונקציונליות: ניתן להשתמש במכשיר לא רק לאיזון אלא גם לניתוח רעידות ואבחון ציוד.
- Affordable Price: Balanset-1A offers excellent value for money, making professional balancing accessible to a wide range of users.
מפרט טכני:
- Range of RMS Vibration Velocity Measurement: 0.02 to 80 mm/s
- Frequency Range of RMS Vibration Velocity Measurement: 5 to 550 Hz
- Number of Correction Planes: 1 or 2
- Range of Rotational Speed Measurement: 100 to 100,000 RPM
- Range of Vibration Phase Shift Measurement: 0 to 360 degrees
- Limits of Permissible Absolute Measurement Error of Vibration Phase Shift: ±1 degree
Package Contents:
- USB interface block
- Two vibration sensors
- Optical sensor (laser tachometer) with magnetic stand
- סוּלָם
- תוֹכנָה
- Plastic carrying case
Warranty: 1 שנה
יתרונות השימוש ב-Balanset-1A:
- Saving Time and Money: Field balancing of the rotor helps avoid downtime and reduces transportation and repair costs.
- Increased Productivity: A balanced rotor operates more efficiently, ensuring high mulcher performance.
- Extended Lifespan: Balancing reduces the load on mulcher components, extending their lifespan.
- Improved Operator Conditions: Reduced vibration makes the operator's work more comfortable and safer.
סיכום
Balancing the forest mulcher rotor is an important procedure that ensures its efficient and safe operation and extends the equipment's lifespan. Regular balancing prevents serious problems and reduces repair and maintenance costs.
The Importance of Regular Balancing
It is recommended to balance the mulcher rotor regularly, especially after intense use or when signs of imbalance, such as increased vibration or noise, appear. This helps keep the mulcher in optimal condition and prevents costly breakdowns.
Recommendations for Using Balanset-1A
- Proper Sensor Installation: Ensure that vibration sensors are securely installed and correctly oriented.
- Accurate Weight and Radius Measurement: Use scales to accurately measure the calibration and corrective weights.
- Safety Precautions: Always follow safety rules when working with the mulcher.
- Regular Balancing Checks: Periodically check rotor balancing, especially after intense use or component replacement.
With the portable balancer and vibration analyzer "Balanset-1A", you can easily and quickly balance the rotor right on-site, saving time and money while improving the performance and reliability of your machine. Don't postpone balancing – take care of your equipment today!
HE 
EN 
AR 
AZ 
BG 
ZH 
HR 
CS 
DA 
NL 
ET 
FI 
FR 
DE 
KA 
EL 
HI 
HU 
ID 
IT 
JA 
KO 
LV 
LT 
NB 
FA 
PL 
PT_BR 
PT 
RO 
RU 
SR 
SK 
SL 
ES 
SV 
TH 
TR 
UR 
UK 
VI
0 הערות