Balanset-1A

Portable Field Balancer "Balanset-1A"

1. Introduction

Balanset-1A is a portable dynamic balancer designed to balance rigid rotors in their own bearings (in-situ), or serve as a measuring system in balancing machines. It offers both single- and two-plane dynamic balancing services for a variety of rotating machinery, including fans, grinding wheels, spindles, crushers, and pumps. The accompanying balancing software automatically provides the correct balancing solution for both single-plane and two-plane balancing.

User-Friendliness

Balanset-1A is designed to be simple to use, even for those who are not vibration experts.

Balancing Procedure

The balancing procedure employs a 3-run method, incorporating the addition of a test mass at every point of balance, also known as the Influence Coefficient Method. The software automatically calculates the balancing weights and their placement (angle), displaying the results in a table and saving them in an archive file.

Reporting and Data Visualization

The system allows for the printing of a balancing report. Additionally, waveform and spectrum of vibration charts are available for more in-depth analysis.

Balanset-1A is a comprehensive solution for dynamic balancing, offering a range of features to ensure accurate and efficient balancing of rotating machinery. Its user-friendly interface and advanced software make it an ideal choice for both experts and non-experts in the field of vibration analysis.

Components Included:

-Interface unit
-Two vibration sensors
-Optical sensor (laser tachometer) with magnetic stand
-Scale
-Software (Note: Notebook not included, available upon additional order)
-Plastic case for transportation

Specifications:

-Vibration Sensors: Two vibro accelerometers with a cable length of 4m (10m optionally available).
-Optical Sensor (Laser Tachometer): Distance range from 50 to 500mm with a cable length of 4m (10m optionally available).
-USB Interface Module: Comes with software for PC connection.
-Software Capabilities: Measures vibration, phase angle, and calculates the value and angle of the correcting mass.

Detailed Specifications:

-Amplitude Vibration Range: 0.05-100 mm/sec
-Vibration Frequency Range: 5 - 300 Hz
-Accuracy: 5% of full scale
-Correction Planes: 1 or 2
-Rotation Speed Measurement: 150-60000 rpm
-Phase Angle Measurement Accuracy: ±1 degree
-Power: 140- 220VAC 50Hz
-Weight: 4 KG

Balanset-1A is a comprehensive solution for dynamic balancing, offering a range of features to ensure accurate and efficient balancing of rotating machinery.

2. Preparing for Two-Plane Balancing with Balanset-1A

2.1. Driver and Software Installation

  1. Install the drivers and Balanset-1A software from the installation flash disk.
  2. Insert the USB cable into the computer's USB port. The interface module will be powered from the USB port.
  3. Use