मोफत अभियांत्रिकी साधन #075
स्प्लाइन जोडणी गणक — ISO 4156
Involute spline geometry per ISO 4156 (metric module, side fit). Enter module, number of teeth, pressure angle, engagement length, and torque for a simplified bearing-stress and torque-capacity estimate — a common design practice, not part of ISO 4156.
Results
पिच व्यास
Simplified Spline Bearing-Stress Estimate
जिथे h = प्रभावी दात उंची (अंदाजे 0.9m), z = दात, L = एंगेजमेंट लांबी, K = भार वितरण गुणक, Dp = पिच व्यास.
भार वितरण: K=0.75 स्थिर, K=0.5 भाराखाली सरकणारे. हा गणक K=0.75 वापरतो.
Note: ISO 4156 defines involute spline geometry, tolerances, fits and inspection — it does not specify a load-capacity method. The bearing-stress, torque-capacity and safety-factor results above are a simplified engineering estimate (uniform load sharing, effective tooth height h ≈ 0.9m, empirical factor K) commonly used in design practice; they do not constitute ISO 4156 compliance. Verify critical designs with detailed analysis.
