What is the difference between ISO 7089 and ISO 7090?

ISO 7089 is a plain (flat) washer, normal series, 200 HV hardness. ISO 7090 is the same dimensions but with a chamfer on one side (beveled edge), also 200 HV. ISO 7090 prevents the washer from digging into soft surfaces.

What size washer do I need for an M10 bolt?

For an M10 bolt per ISO 7089: inner diameter 10.5 mm, outer diameter 20 mm, thickness 2.0 mm.

When should I use spring washers?

Spring washers (split lock washers, DIN 127 / ISO 7091) were historically used to prevent loosening. Modern practice prefers Nord-Lock washers, Belleville washers, or chemical threadlockers. Spring washers are now considered less effective than these alternatives.

What hardness should flat washers have?

ISO 7089/7090 specifies 200 HV minimum hardness for standard flat washers. For high-strength bolting (class 10.9/12.9), use washers per ISO 7089 with 300 HV hardness to prevent embedding.

Do I always need a washer under a bolt head?

Washers are recommended when: (1) the hole is oversized, (2) the surface is soft or painted, (3) high-strength bolts are used (prevents embedding), (4) the surface is uneven, or (5) the bolt passes through a slotted hole.

免費工程工具

墊片選型 — ISO 7089 / 7090

依 ISO 7089/7090 與 DIN 127 查詢平墊片與彈簧墊片尺寸。選擇螺栓尺寸以查看墊片內徑、外徑與厚度。

ISO 7089ISO 7090DIN 127

結果

平墊片 — ISO 7089

—

平墊片內徑

—

平墊片外徑

—

平墊片厚度

—

彈簧墊片 (DIN 127)

—

平墊片 — ISO 7089 (標準系列)

螺栓	內徑 (mm)	OD (mm)	t (mm)
M6	6.4	12	1.6
M8	8.4	16	1.6
M10	10.5	20	2.0
M12	13.0	24	2.5
M16	17.0	30	3.0
M20	21.0	37	3.0
M24	25.0	44	4.0

墊片選型 — ISO 7089/7090 查詢 | 免費線上工具

結果

平墊片 — ISO 7089 (標準系列)

商店

支撐

聯絡我們