示例 叶轮
在风洞中平衡风机叶轮
目标：目标是在风洞中对风扇叶轮进行动平衡，风扇叶轮是能够将人吊到空中的装置的一部分。该装置由两个风扇组成，每个风扇由一个 400 马力的电机驱动。Balanset-1A 因其精确性和有效性而被选中执行任务。过程：Balanset-1A 用于测量风扇叶轮的不平衡度。确定不平衡后，在叶轮上添加适当的砝码，以抵消不平衡并减少振动。结果：通过动态平衡，实现了以下优点：降低噪音 更多信息
示例 转子
平衡皮革加工机器的转子
使用 Balanset-1A 对皮革剃毛机转子进行动态平衡 显示幻灯片 1 显示幻灯片 2 下一张幻灯片 上一张幻灯片 Impeccable leather processing is a foundational factor in producing high-quality leather goods. Achieving this requires not only refined craftsmanship but also reliable equipment. A critical component in the leather processing sequence is the leather shaving machine, where the hide is evenly trimmed to achieve the necessary thickness. The Problem of Vibration Unfortunately, the operation of the leather shaving machine is not always smooth. Vibrations occurring during the rotor’s operation can lead to defects on the leather, reduced productivity, and premature equipment 更多信息
示例 碎木机
平衡粉碎机转子
使用 Balanset-1A 对 AHWI 森林割草机的转子进行动态平衡 显示幻灯片 1 显示幻灯片 2 下一张幻灯片 上一张幻灯片 AWHI mulchers are extensively used for clearing forested areas, removing undergrowth, and processing wood waste. To ensure optimal operation and longevity of these machines, the mulcher’s rotor must be balanced. This article explores the dynamic balancing process of an AHWI mulcher rotor using the Balanset-1A device. Balancing Process Due to high initial vibration, the first balance was conducted at a minimal rotation speed. – Initial vibration measurement: Using Balanset-1A, the initial vibration level of the rotor was measured, exceeding 100 mm/sec, 更多信息
示例 碎木机
平衡粉碎机转子
使用 Balanset-1A 平衡粉碎机转子 显示幻灯片 1 显示幻灯片 2 下一张幻灯片 上一张幻灯片 High vibration levels in a mulcher can significantly degrade its operation and lead to increased bearing wear. In one case involving a forestry mulcher, the Balanset-1A balancing tool was used for dynamic rotor balancing. This procedure not only reduced vibration but also brought a range of other benefits. Balancing Process: – Measuring initial vibration levels: The dynamic balancing device measures the initial vibration levels. – Placing weights: Weights of known mass were placed on both sides of the rotor to alter its vibration. – 更多信息
