How do I calculate timing belt length in teeth?

Belt length L = 2C + π(d1+d2)/2 + (d2−d1)²/(4C) where d = z×p/π (pitch diameter from teeth×pitch). Number of belt teeth = L/pitch, rounded to nearest standard belt size.

What is the difference between HTD and GT profiles?

HTD (High Torque Drive) uses a curvilinear tooth profile. GT (Gates Tooth, e.g., GT2, GT3, GT5) is an improved profile with a modified curvilinear shape, providing better load distribution, reduced backlash, and higher power capacity than HTD.

How do I select the right timing belt pitch?

Pitch selection depends on power and speed: GT2 (2mm) for light duty/3D printers, HTD-3M/GT3 for small drives up to ~5kW, HTD-5M/GT5 for medium 2-30 kW, HTD-8M for 10-100 kW, HTD-14M for 50-250+ kW.

What is the minimum number of teeth on a timing pulley?

Minimum pulley teeth depend on pitch: GT2/3M: 12 teeth, 5M: 14 teeth, 8M: 22 teeth, 14M: 28 teeth. Using fewer teeth increases belt bending stress and reduces belt life.

Can I adjust center distance for timing belts?

Timing belts are not elastic like V-belts, so center distance must match the belt length exactly. Use a tensioner idler or select pulleys and belt length that give the desired center distance. Belt manufacturers provide tables of standard belt lengths.

मोफत अभियांत्रिकी साधन #089

टाइमिंग बेल्ट कॅल्क्युलेटर

पिचमध्ये टाइमिंग बेल्टची लांबी आणि दातांची संख्या गणना करा. HTD 3/5/8/14 आणि GT2/GT3/GT5 प्रोफाइलना समर्थन. पुली दात, केंद्र अंतर आणि पिच प्रविष्ट करा.

HTD 3/5/8/14 GT2/GT3/GT5 समकालिक

बेल्ट पिच

ड्रायव्हर पुली दात (z₁)

ड्रिव्हन पुली दात (z₂)

केंद्र अंतर (mm)

Quick presets

Results

बेल्ट लांबी (दातांची संख्या)

—

बेल्ट लांबी (mm)

—

ड्राइव्ह गुणोत्तर

—

पिच व्यास (d₁ / d₂)

—

प्रत्यक्ष केंद्र अंतर

—

पिच व्यास

बेल्ट लांबी (दातांची संख्या)

टाइमिंग बेल्ट पिच निवड

पिच	प्रोफाइल	शक्ती श्रेणी	किमान पुली दात
2 mm	GT2	हलके काम, 3D प्रिंटर्स	12
3 mm	HTD-3M / GT3	5 kW पर्यंत	12
5 mm	HTD-5M / GT5	2 – 30 kW	14
8 mm	HTD-8M	10 – 100 kW	22
14 mm	HTD-14M	50 – 250+ kW	28

उदाहरण — HTD-5M बेल्ट

Given: z₁=20, z₂=60, pitch=5 mm, C=200 mm

d₁ = 20×5/π = 31.83 mm, d₂ = 60×5/π = 95.49 mm

L_mm = 2×200 + π(31.83+95.49)/2 + (95.49-31.83)²/(4×200) = 400 + 200.0 + 5.1 = 605.1 mm

Belt teeth = 605.1/5 = 121.0 → nearest standard (even) catalogue size: 122 दात (610 mm बेल्ट), then re-check the actual center distance

Timing Belt Calculator | HTD, GT2, GT3 | Free Online Tool

Published by Nikolai Shelkovenko on फेब्रुवारी 15, 2026 जुलै 3, 2026

Results

पिच व्यास

बेल्ट लांबी (दातांची संख्या)

टाइमिंग बेल्ट पिच निवड

Shop

आधार

Contact