免费工程工具
离心机重力加速度 (RCF) 计算器
将离心机转速转换为相对离心力 (×g),或根据所需的相对离心力计算转速。包括叶尖速度和角速度。
Vibromera 工程师在使用 Balanset-1A 便携式平衡器为离心机转子进行现场平衡准备时,会采用这一转速(RPM)与 g 值的换算方法。
成果
相对离心力(RCF)
RCF 是作用在样品上的有效力,以重力加速度的倍数表示:
- n — 转速(RPM)
- R —转子半径(单位:毫米)(旋转中心到样品位置的距离)
- 1.118 × 10⁻⁶ — 由 (2π/60)²/(9.81×1000) 组成的合并常数
反向:来自 RCF 的 RPM
典型 RCF 值
| 应用 | 典型 RCF (×g) | 典型转速 |
|---|---|---|
| 血液分离 | 1,000-3,000 | 2,000-5,000 |
| 细胞沉淀 | 300-500 | 1,000-2,000 |
| 蛋白质沉淀 | 10,000-20,000 | 10,000-15,000 |
| 亚细胞分级分离 | 20,000-100,000 | 15,000-50,000 |
| 超速离心 | 10万至100万 | 4万至10万 |
| 工业分离器 | 1,000-10,000 | 3,000-10,000 |
实例
已知: R = 100 毫米,转速 = 5000 转/分钟
RCF = 1.118 × 10⁻⁶ × 5000² × 100 = 2,795 ×克
ω = 2π × 5000 / 60 = 523.6 弧度/秒
叶尖速度 = 0.1 × 523.6 = 52.4 米/秒
💡提示: 在科学实验方案中,离心机条件应始终以相对离心力(RCF,单位为×g)而非转速(RPM)来表示。这可以确保不同转子尺寸的不同离心机型号之间的实验结果具有可重复性。
RCF is the effective force on the sample in a centrifuge, expressed as multiples of gravitational acceleration (×g). RCF = 1.118 × 10⁻⁶ × n² × R, where n is RPM and R is rotor radius in mm. Unlike RPM alone, RCF accounts for rotor size, making results comparable across centrifuges.
RPM alone doesn't specify the actual force on the sample — it depends on rotor radius. Two centrifuges at the same RPM but different rotor sizes produce different g-forces. Always report RCF (×g) in scientific protocols for reproducible results.
请使用最大半径(rmax)——即从旋转轴线到样品管底部的距离。这样得到的是样品所承受的最大 g 力。某些沉降方案则规定使用 ravg(平均半径)。
典型范围:
- 台式微型离心机:最高 20,000 ×g
- 通用实验室离心机:3,000–15,000 ×g
- 高速离心机:25,000–100,000 ×g
- 超速离心机:最高 1,000,000 ×g
- 工业分离机:1,000–10,000 ×g
Use the reverse formula: n = √(RCF / (1.118 × 10⁻⁶ × R)), where RCF is the desired g-force and R is rotor radius in mm. Use the "RCF → RPM" mode toggle at the top of this calculator for automatic conversion.
本页所述的操作流程由 Vibromera 团队使用 Balanset-1A(一款用于现场转子平衡的便携式双通道动平衡仪及振动分析仪)开发并经过实地测试。
适用于离心机、分离机和所有旋转机械的专业振动分析和平衡仪器。
Nikolai Shelkovenko
Nikolai Shelkovenko是一名振动分析工程师,也是Vibromera的创始人兼首席执行官。 15年多来,他一直在现场——而非在试验台上——为旋转设备进行平衡:粉碎机、工业风机、破碎机、离心机、轴和主轴。正是这些实际工作催生了Balanset系列仪器——它们被设计为一种专业人员可以随身携带到机器旁、在现场独立使用的工具,而非实验室设备。 Vibromera成立于2017年,自2023年起总部设于葡萄牙波尔图。Balanset系列产品的研发、组装与支持均在此完成。旗舰产品是Balanset-1A,一款用于单平面及双平面平衡和振动诊断的便携式分析仪。 Nikolai亲自参与客户支持工作,处理各种棘手的平衡案例,并参与软件开发。他以任何语言为全球客户提供服务。