How is fillet weld strength calculated?

Fillet weld capacity = throat area × allowable shear stress = a × L × (fu / (√3 × βw × γM2)), where a is throat thickness, L is effective length, fu is ultimate tensile strength, βw is correlation factor, and γM2 is safety factor (typically 1.25).

What is the throat thickness of a fillet weld?

Throat thickness (a) is the shortest distance from the root to the face of the weld. For an equal-leg fillet with leg size s: a = s × cos(45°) = 0.707 × s. For example, a 6mm fillet weld has throat thickness ≈ 4.24 mm.

What is the difference between fillet and butt welds?

Fillet welds join two surfaces at right angles (T-joints, lap joints) and carry load in shear through the throat. Butt welds join two plates end-to-end with full or partial penetration and carry load in direct tension/compression through the weld thickness.

What is the correlation factor βw?

The correlation factor βw accounts for the material grade. Per EN 1993-1-8: S235 → βw = 0.8, S275 → βw = 0.85, S355 → βw = 0.9, S420 → βw = 1.0, S460 → βw = 1.0.

How do I calculate weld stress from an applied force?

Weld stress σ = F / (a × L_eff), where F is the applied force, a is throat thickness, and L_eff is the effective weld length (total length minus 2×a for end craters). Compare this stress to the allowable stress to check adequacy.

免費工程工具

焊接強度計算器

依據 EN 1993-1-8 計算角接焊與對接焊的承載能力。輸入焊接類型、焊喉尺寸、長度、施加力與材料等級。

EN 1993-1-8角接焊與對接焊應力校核

結果

焊接承載能力

—

施加應力

—

允許應力

—

利用率

—

焊喉厚度 (a)

—

角接焊（簡化法）

對接焊

全熔透對接焊視為母材——允許應力等於板材允許應力。

⚠️ 此為簡化分析。對於組合應力，請依據 EN 1993-1-8 第 4.5.3 條使用方向法。

Categories:

Vibromera

專業便攜式轉子平衡機與振動分析儀製造商。提供全球運送與工程師支援。

R. Nova da Madorninha 152, 4460-376 Sra. da Hora, Portugal

增值稅（葡萄牙）： PT314539760

LUCID（德國）： DE4462352769937

商店

支撐

聯絡我們

+372 5836 4849

[email protected]

聯繫我們 →

支援語言：English · Deutsch · Русский · Español

付款方式：

VISA MC AMEX STRIPE PAYPAL BANK

透過 DHL · UPS · EMS 全球運送

Balanset-1A · €1975 Ask engineer

焊接強度計算器 — 角接焊與對接焊 | Vibromera

結果

角接焊（簡化法）

對接焊

相關計算器

商店

支撐

聯絡我們