Balancing devices are in great demand at the enterprises manufacturing and operating fans. More than 40 enterprises in Estonia, Croatia, Slovakia, Peru, Indonesia, India, Russia, Belarus, Ukraine etc engaged in the production of these products use our equipment when balancing fans rotor wheels within their own bearings. Our balancing devices have also been introduced at more than 50 enterprisesRead more about Fans balancing[…]
Vibration and noise levels are one of the most important characteristics of the coolers quality, which are widely used for cooling in modern electronic equipment (personal computers, medical equipment, etc.). By order of one of the medical equipment manufacturers, we carried out balancing coolers batch in the amount of 100 pieces. For this purpose, aRead more about Balanset-1 for coolers balancing[…]
D. Feldman Chief Technician of OU Vibromera Part 1 : https://vibromera.eu/example/on-balancing-the-propeller-of-the-aircraft-in-the-field-environment-part-1/ On balancing the propeller of the aircraft in the field environment “Propeller is the aircraft driver, and to balance it can only a striver” The results of balancing the propeller MTV-9-K-C/CL 260-27 and vibration testing of aerobatic airplane SU-29 3.1. IntroductionRead more about On balancing the propeller of the aircraft in the field environment. Part 2[…]
D. Feldman Chief Technician of OU Vibromera On balancing the propeller of the aircraft in the field environment “Propeller is the aircraft driver, and to balance it can only a striver” In lieu of a preface Two and a half years ago, our company began mass production of the Balanset-1, intended for balancingRead more about On balancing the propeller of the aircraft in the field environment. Part 1[…]
But for using our equipment for rotors balancing within own bearings, we have gained some experience in its using as a measuring and computing unit for above resonance balancing machines, cars crankshafts balancing machines, drive shafts balancing machines, micro motors rotors balancing machines, separator pots balancing machines, special shafts balancing machines, etc. In addition, asRead more about Using our equipment as a measuring and computing system in balancing machines[…]
When balancing heavy exhausters (No. No. 16-18), with the rotor wheels more than 500 kg, our devices contribute to a very low level of residual vibration (0.1-0.3 mm/s). These characteristics were obtained by our employees when balancing exhausters within their own bearings at the different enterprises. In just three exhauster balancing starts, the vibration levelRead more about Exhausters balancing[…]
Balancing the repaired impeller.
I balanced the fan impellers. That was realy cold outside =(
I balanced the fan impellers. Here are a couple of photos.
Somewhere in sunny Indonesia