Our portfolio

Hydraulic pumps balancing

Hydraulic pumps balancing

“Balanset-1” devices have been successfully used for hydraulic pumps rotor wheels balancing within their own bearings. This contributed to significant reduction of the dynamic loads affecting hydraulic pumps bearing units, which increased the service life and improved the operational reliability of the entire product.

Assembled vacuum pumps rotors balancing.

Assembled vacuum pumps rotors balancing.

We have developed and implemented the stands balancing the assembled high-speed vacuum pumps rotors. These rotors have very high demands on the balancing quality (1st class according to the ISO 22061-76), since their operating rate is 42,000 – 60,000 r/min. The required balancing quality of such rotors required special technology, which provided the implementation ofRead more about Assembled vacuum pumps rotors balancing.[…]

Fans balancing

Fans balancing

Balancing devices are in great demand at the enterprises manufacturing and operating fans. More than 40 enterprises in Estonia, Croatia, Slovakia, Peru, Indonesia, India, Russia, Belarus, Ukraine etc engaged in the production of these products use our equipment when balancing fans rotor wheels within their own bearings. Our balancing devices have also been introduced at more than 50 enterprisesRead more about Fans balancing[…]

Assembled separator balancing

Assembled separator balancing

The enterprises producing separators have used a technology involving separator certain units balancing. This made it difficult to achieve the acceptable vibration levels of the assembled machine, since the separators rotors have very high rotation rates at which even minor manufacturing and assembly errors can lead to a higher level of machines imbalance. At oneRead more about Assembled separator balancing[…]

On balancing the propeller of the aircraft in the field environment. Part 2

On balancing the propeller of the aircraft in the field environment. Part 2

D. Feldman Chief Technician of OU Vibromera   Part 1 : https://vibromera.eu/example/on-balancing-the-propeller-of-the-aircraft-in-the-field-environment-part-1/   On balancing the propeller of the aircraft in the field environment  “Propeller is the aircraft driver, and to balance it can only a striver”     The results of balancing the propeller MTV-9-K-C/CL 260-27 and vibration testing of aerobatic airplane SU-29 3.1. IntroductionRead more about On balancing the propeller of the aircraft in the field environment. Part 2[…]

On balancing the propeller of the aircraft in the field environment. Part 1

On balancing the propeller of the aircraft in the field environment. Part 1

D. Feldman Chief Technician of OU Vibromera     On balancing the propeller of the aircraft in the field environment  “Propeller is the aircraft driver, and to balance it can only a striver”   In lieu of a preface Two and a half years ago, our company began mass production of the Balanset-1, intended for balancingRead more about On balancing the propeller of the aircraft in the field environment. Part 1[…]

Using our equipment as a measuring and computing system in balancing machines

Using our equipment as a measuring and computing system in balancing machines

But for using our equipment for rotors balancing within own bearings, we have gained some experience in its using as a measuring and computing unit for above resonance balancing machines, cars crankshafts balancing machines, drive shafts balancing machines, micro motors rotors balancing machines, separator pots balancing machines, special shafts balancing machines, etc. In addition, asRead more about Using our equipment as a measuring and computing system in balancing machines[…]