Madaraja ya ufanisi ya IE ni nini?

IE classes are international efficiency classification levels for electric motors defined by IEC 60034-30-1. IE1 is Standard Efficiency, IE2 is High, IE3 is Premium, IE4 is Super Premium, and IE5 is Ultra Premium. The 2014 edition defines IE1–IE4; normative IE5 limits were added in IEC 60034-30-1:2025.

Uboreshaji kutoka IE2 hadi IE4 unaweza kuokoa nishati kiasi gani?

For a typical 11 kW, 4-pole motor running 6000 hours/year, upgrading from IE2 (89.8%) to IE4 (93.3%) saves approximately 2,750 kWh/year. At €0.15/kWh, that's about €410/year.

Kiwango cha chini cha mahitaji ya ufanisi katika EU ni kipi?

Tangu Julai 2023, kanuni ya Ecodesign ya EU inahitaji IE4 kwa motors 75–200 kW na IE3 kwa motors 0.75–75 kW (nguzo 2/4/6). Motors za awamu moja za nguvu 0.12 kW na zaidi lazima zikidhi IE2.

Je, kasi ya motor inaathiri ufanisi?

Ndiyo, motors za nguzo 2 (3000 RPM) kwa ujumla zina ufanisi wa chini kidogo kuliko motors za nguzo 4 (1500 RPM) za nguvu sawa. Motors za nguzo 6 na nguzo 8 zina ufanisi unaoshuka zaidi. IEC 60034-30-1 inabainisha mipaka tofauti kulingana na idadi ya nguzo.

Kipindi cha kawaida cha kulipa gharama kwa uboreshaji wa motor ni kipi?

Vipindi vya kulipa gharama kwa uboreshaji wa ufanisi wa motor kwa kawaida ni kati ya miaka 1–4 kulingana na ukubwa wa motor, masaa ya uendeshaji, na gharama ya umeme. Motors zinazofanya kazi masaa 6000+ kwa mwaka zenye gharama ya juu ya umeme zina kipindi kifupi zaidi cha kulipa gharama.

Zana ya Uhandisi Isiyolipisha

Kigeuzi cha Ufanisi wa Motor

Compare IE1–IE4 motor efficiency classes per IEC 60034-30-1:2014, plus indicative IE5 (Ultra Premium). Calculate annual energy cost and savings from upgrading to a higher efficiency class.

IEC 60034-30-1IE1 – IE5Energy Savings

Motor Power (kW)

Poles

Daraja la Sasa la IE

Darasa la IE Linalolengwa

Running Hours (/year)

Gharama ya Umeme (€/kWh)

Quick presets

Results

Akiba ya Nishati ya Kila Mwaka

—

Ufanisi wa Sasa

—

Ufanisi Unaolengwa

—

Matumizi ya Nishati ya Kila Mwaka (Sasa)

—

Matumizi ya Nishati ya Kila Mwaka (Inayolengwa)

—

Gharama ya Kila Mwaka (Sasa)

—

Gharama ya Kila Mwaka (Inayolengwa)

—

Akiba ya Gharama ya Kila Mwaka

—

Gharama ya Nishati ya Kila Mwaka kulingana na Darasa la IE

Fomula ya Matumizi ya Nishati

Ufanisi wa Chini wa Darasa la IE (nguzo 4, 50 Hz)

Power (kW)	IE1 (%)	IE2 (%)	IE3 (%)	IE4 (%)
0.75	72.1	79.6	82.5	85.7
1.5	77.2	82.8	85.3	88.2
3	81.5	85.5	87.7	90.4
7.5	86.0	88.7	90.4	92.6
11	87.6	89.8	91.4	93.3
22	89.9	91.6	93.0	94.5
55	92.1	93.5	94.6	95.7
110	93.3	94.5	95.4	96.3
200	94.0	95.1	96.0	96.7

Source: IEC 60034-30-1:2014 (Tables 3, 5, 7, 9), nominal efficiency limits for 4-pole, 50 Hz motors. IE class limits vary by pole count, frequency and rated power — do not apply this 4-pole table to 2-pole or 6-pole motors (the calculator uses separate data sets for each pole count). Limits are defined from 0.12 kW to 1000 kW; ratings above 200 kW use the 200 kW limit, and ratings below 0.75 kW have lower limits than shown here.

About IE5: IEC 60034-30-1:2014 defines only IE1–IE4 for line-operated motors; IE5 (Ultra Premium) appears there only informatively (Annex A) with a target of approximately 20 % lower losses than IE4. Normative IE5 limits were introduced later in IEC 60034-30-1:2025. The IE5 figures used by this calculator are indicative values derived from the 20 %-lower-losses target — consult IEC 60034-30-1:2025 (or IEC TS 60034-30-2 for converter-fed motors) for exact IE5 limits.

Kikokotoo cha Ufanisi wa Motor | Zana ya Akiba ya IE1–IE5

Published by Nikolai Shelkovenko on Febuari 15, 2026 Julai 2, 2026

Results

Fomula ya Matumizi ya Nishati

Ufanisi wa Chini wa Darasa la IE (nguzo 4, 50 Hz)

Duka

Support

Contact