What is the bearing equivalent dynamic load P?

The equivalent dynamic load P is a hypothetical constant radial load that would give the same bearing life as the actual combined radial and axial loads. It is calculated as P = X·Fr + Y·Fa, where X and Y are load factors depending on the bearing type and load ratio.

What are the X and Y factors?

X is the radial load factor and Y is the axial load factor. They depend on the bearing type and the ratio Fa/Fr relative to the e-value. When Fa/Fr ≤ e, the axial load has negligible effect (X=1, Y=0). When Fa/Fr > e, both X and Y apply.

What is the e-value in bearing calculations?

The e-value is a threshold ratio specific to each bearing type. It determines whether the axial load significantly affects bearing life. When Fa/Fr exceeds e, the Y factor must be applied to account for the axial load contribution.

How do I handle pure radial load?

For pure radial load (Fa = 0), the equivalent load simplifies to P = Fr. No axial factor applies, and you can use the radial load directly in the L10 life calculation.

Can I use this for static equivalent load P0?

This calculator computes the dynamic equivalent load P for life calculations. For static equivalent load P0, the formula is similar but uses different X0 and Y0 factors. Use the Bearing Static Safety Factor calculator for P0 assessment.

Free Engineering Tool #046

বিয়ারিং সমতুল্য গতিশীল লোড ক্যালকুলেটর

Calculate the equivalent dynamic bearing load P = X·F_r + Y·F_a. Automatically selects X,Y factors based on bearing type and F_a/F_r ratio vs. e-value.

P = X·Fr + Y·Fa e-Value Check Auto X,Y Selection

Radial Load F_r (kN)

Axial Load F_a (kN)

Bearing Type

Quick presets

Results

Equivalent Dynamic Load P

—

Fa/Fr Ratio

—

e-Value Threshold

—

Factors Used (X, Y)

—

Load Condition

—

Equivalent Dynamic Load

The equivalent dynamic bearing load combines radial and axial forces into a single value:

The condition is: if F_a/F_r ≤ e, then P = F_r. If F_a/F_r > e, then P = X·F_r + Y·F_a.

X, Y and e Factors by Bearing Type

Bearing Type	e	X (Fa/Fr ≤ e)	X (Fa/Fr > e)	Y (Fa/Fr > e)
Deep groove ball (DGBB)	0.19	1	0.56	2.30
Angular contact 15°	0.38	1	0.44	1.47
Angular contact 25°	0.68	1	0.41	0.87
Angular contact 40°	1.14	1	0.35	0.57
Self-aligning ball	0.40	1	0.65	1.71
Cylindrical roller	—	1	—	—
Tapered roller	0.37	1	0.40	1.60
Spherical roller	0.27	1	0.67	2.35

ℹ️ Note: The values above are simplified typical values. Exact X, Y, and e values depend on the specific bearing series and the ratio C₀/F_a. Consult manufacturer catalogs for precise values.

Practical Example

Example — Deep Groove Ball Bearing 6208

Given: F_r = 8 kN, F_a = 3 kN

F_a/F_r = 3/8 = 0.375 > e = 0.19 → axial load is significant

P = 0.56 × 8 + 2.30 × 3 = 4.48 + 6.90 = 11.38 kN

Bearing Equivalent Dynamic Load Calculator | P = X·Fr + Y·Fa | Free Online Tool

Published by admin on ফেব্রুয়ারি 15, 2026 ফেব্রুয়ারি 15, 2026

Results

Equivalent Dynamic Load

X, Y and e Factors by Bearing Type

Practical Example

দোকান

Support

Contact