六大类
| 类别 | ISO 15243 代码 | 子类型 |
| 1. 疲劳 | 5.1 | 次表面起始、表面起始 |
| 2. 磨损 | 5.2 | 磨粒磨损、粘着磨损(涂抹) |
| 3. 腐蚀 | 5.3 | 湿气腐蚀、摩擦腐蚀 |
| 4. 电蚀 | 5.4 | 电流过大、漏电(波纹) |
| 5. 塑性变形 | 5.5 | 过载,压痕(布氏压痕) |
| 6. 开裂和断裂 | 5.6 | 强迫断裂、疲劳断裂、热裂纹 |
ISO 15243 将滚动轴承损伤分为六大类:疲劳、磨损、腐蚀、电蚀、塑性变形以及开裂/断裂。
疲劳剥落是预期的寿命终结型失效。过早失效最常由污染、润滑不足和安装不当引起。
疲劳表现为承载区材料剥落(随时间逐渐发展)。压痕表现为与滚动体间距相对应的永久性凹痕(由单次过载造成)。
变频器驱动电机产生的杂散电流会形成特征性的搓衣板状沟纹。可使用绝缘轴承或轴接地环来防止。
正确润滑、污染控制、正确安装、对中以及振动监测是主要的预防措施。
本页所述的操作流程由 Vibromera 团队使用 Balanset-1A(一款用于现场转子平衡的便携式双通道动平衡仪及振动分析仪)开发并经过实地测试。
Replace bearing. If premature: check load calculations, alignment, and lubrication adequacy.Improve lubrication (higher viscosity, cleaner oil). Check contamination sealing.Ensure minimum load. Improve lubrication. Check for proper preload.Improve sealing. Filter lubricant. Flush system before installation.Improve sealing. Use corrosion-resistant bearings (stainless steel). Proper storage.Improve fit (tighter interference). Use adhesive compounds. Reduce vibration during transport/standstill.Install insulated bearings (e.g., INSOCOAT). Use shaft grounding rings. Add common-mode filters.Avoid welding through bearings. Use insulated bearings. Ground the shaft properly.Check static safety factor s₀. Prevent shock loads. Use bearings with higher C₀ rating.Increase bearing size. Reduce applied loads. Check for misalignment.Check mounting practices. Verify fit tolerances. Inspect for proper support.Review lubrication type, quantity, and relubrication interval. Check for contamination.